Shop Evenheat Glass Kilns

All kilns are made to order and may take 6-8 weeks from the manufacturer depending on make and model, unless otherwise stated "in stock at store" on that particular model.  Please contact us for fusedglasswarehouse time frame, shipping costs and pallet charges, if applicable.

Free Shipping 

Inside Contiguous USA

The 48 contiguous states

Additional Surcharge for AK, HI and USA Islands

Call: 1-603-347-1591 / Email:

Glass Kilns Max Temp. 1700F

Please understand the delivery man will not set up, install or put the unit in your house/building, they will only do curbside delivery and they do not go up/down stairs and steps.



    Kiln Saftey

  • Use common sense while installing and using your kiln.
  • Do not install your kiln closer than 12" from any surface, or closer than 18” from a combustible surface. Remove all potentially combustible materials from the kiln area.
  • Make sure all electrical specifications are followed. Use correct voltage, wire size and circuit breaker. Make sure all connections are tight. Avoid using aluminum wire. Always use the proper grounded receptacle. A qualified electrician or service person should be used for all electrical service or repairs.
  • Install in covered, walled in, well-ventilated area.  Fumes from the ware should be vented to the outside. 
  • Avoid moisture. Do not allow your kiln to get wet. Never use your kiln outside!
  • Always keep children and unsupervised personnel away. Surface will get hot and a burn could result.
  • Fire glass only to the manufacturers recommended firing temperature. Improper fire temperatures could result in damage to your kiln. Do not operate glass kilns over the maximum temperature rating. 
  • Replace any worn or defective parts with ONLY genuine replacement parts.
  • Unplug kiln when not in use and if there is an electrical storm.
  • Unplug the kiln before servicing or vacuuming.
  • Do not drop or slam the lid shut.
  • Let the kiln cool to room temperature before opening the lid.
Copper Studio Pro STP with Window V8 Solid Base GTS 2541/ Dyna-Lift
CopperStudio Pro STP with WindowV8 Solid BaseGTS 2541/ Dyna-Lift









GTS 41 Kingpin 88 Studio Pro 14 STP Studio Pro 17 STP
GTS 41Kingpin 88Studio Pro 14 STPStudio Pro 17 STP









Studio Pro 24 Studio Pro 28 Studio Pro 41
Studio Pro 24Studio Pro 28Studio Pro 41